Airis Switch

1. Warnings – Note: DANGER!!! HIGH TEMPERATURE!!!

-Once heating chamber with extra bullet installed, the temperature is very high inside. Please don’t touch it directly with your hand when replacing the bullet.

-Always keep the device vertical when using the extra bullet, especially for wax/oil as spillage can occur.

-Vaporization may vary depending on type of material and temperature setting.

2. Turn on/off

-Press the power button 5 times rapidly to turn on/off the device.

-The device has a safety power duration function; it will automatically shut down after 3 minutes of use. The device will vibrate to remind you.

-Simply press the power button 5 times rapidly to re-activate it.

3. Temperature Setting

The airis Switch has three temperature settings. The different temperatures will be shown by the LED light: Green light=420* (Low), Blue light=435*F (Mid), White light=450* (High)

-When you turn on the device, your temperature will be set at 420*F (Low). A green flashing LED light will appear indicating that your device has started the heating up process. When it has attained 420*F, the green light will stop flashing and the device will vibrate. Flashing=heating up mode; solid=desired temperature. Also, the device will vibrate when the desired temperature is reached.

-Adjusting temperature: press the power button once; the LED light will change to a different color indicating the heating selection.

-Keep pressing power button to cycle through the heating settings.

-Wait 3 or 4 seconds before inhaling.

4. Charging

-During operation, a low battery will be indicated by an alternate red LED light flashing 10 times. That means you have to recharge the device. It will shut down if the battery power becomes excessively low.

-To charge, just remove the silicone lid and use the provided micro USB cable. A red LED light will appear: solid = charging; disappeared = fully charged.

-A full charge is recommended before first use and it will take about 2 – 3 hours from empty to fully charged.

5. Cleaning & Maintenance

-Lock the device before cleaning. Remove the magnetic mouthpiece and empty the ceramic chamber completely.

-To clean the ceramic heating chamber, use the cleaning brush to gently remove any excess particles inside and around the chamber, as below:

-To clean the airflow path, use the provided pipe cleaner.

-To clean the silicone lid, just remove it from the device and then throw it into hot water, or you can replace it with a new one by yourself.

Note:

• While using the device, portions of the device may reach high temperatures. Don’t clean or disassemble it until all portions have cooled completely.
• Don’t immerse the device in any kind of liquid. It will damage the heating element.

Warranty

-1 year limited warranty from the date of retail purchase by the original purchaser.

-If physical defect arises and a claim is received within the warranty period, we will fix it or replace it with a new one.

-We will not be held responsible for any special consequential or incidental damages by the use or misuse of the products and are not responsible for any damage caused by inappropriate, incorrect or irresponsible use of the products.

Cautions

-Read this user guide carefully before using the device.

-Do not use it while damaged.

-This product may include small parts; keep out of reach of children and pets.

-This product is intended for use by person of legal age. Non-smokers, children, and breastfeeding women should not use this product.

-This product is not a medical device and it is not intended to diagnose, treat, cure, or prevent any diseases or other conditions.

Key Features

1. Unique 360* rotation mouthpiece design
2. Patented 3D ceramic heating chamber, pure vapor and no combustion
3. Isolated air path, easy to clean
4. Three temperature setting; 3 in 1 baking vaporizer
5. Vibration mode and memory function of last temperature used
6. 2200mAh big battery capacity
7. Discreet and universal micro USB charging port

What is airis Switch

• Mouthpiece
• Heating chamber
• On/off power button
• Temps indicator light
• USB charging port
• Isolated air hole
• Silicone lid
• Extra herb bullet
• Wax/oil bullet

Kit Includes

1 airis Switch device

1 Extra herb bullet

1 Wax bullet

1 Oil bullet

2 Extra silicone lids

3 Pipe cleaners

1 Fiber carry bag

1 USB charging cable

1 Cleaning brush

1 Dab tool

1 User manual

1 Gift box

How to Operate

Loading

1. To load the dry herb, please follow these steps:
   1. Remove the magnetic mouthpiece from the ceramic chamber.
   2. Load the chamber full with grinded dry herb (always make sure to finely grind your materials before vaporizing), but don’t over-pack because proper airflow is needed for best results.
   3. Re-attach the mouthpiece

Note –

-Using the ceramic heating chamber with waxes or essential oil will damage the device if any material drips into the heating element.

-Vaporization may vary depending on type of material and temperature setting.

P.S. You also can load the dry herb with extra herb bullet (it has 5 small holes at bottom), as below

-Unscrew the cap. Step 1

-Load the bullet with dry herb. Step 2

-Connect the bullet with magnetic mouthpiece. Step 3

-Re-attach the whole part back with the device body. Step 4

2. To load the waxes and essential oils:

Wax and oil require the high heating setting as well as the use of the extra wax/oil bullet. (It has a vertical bar in the middle of the chamber.)

-To load the wax or oil, just unscrew the cap. Step 1

-Fill the wax with dab tool or the oil with needle bottle into the bullet (just a little bit). Step 2

-Connect the bullet with magnetic mouthpiece . Step 3

-Re-attach the whole part back with the device body. Step 4

Your purchase of an Airistech vaporizer is appreciated. All the Airistech brand vaporizers come with a warranty. Every vaporizer will have a unique code with which you can request your warranty from Airistech.

Process claim for warranty:

Firstly, please save the code on the box when you receive the products. Check on our website for anti-counterfeiting process.

Secondly, contact us if a quality problem occurs.

Thirdly, claim for your warranty from the place of purchase; we will deal with our distributors or agents directly.

Warranty details:

Heating coils – 3 months warranty

Batteries – 6 months warranty

Herbva series products – 1 year warranty

Thanks again for choosing Airistech brand, and pay attention to our design. We will continue designing good products and offering you the best service. Quality is our first priority; service is the basic principle, and you are the core of our business.